ALTENERGY POWER SYSTEM INC.
5
Version
：
4.1
Configure the WiFi Bridge to connect to Wireless Router, please refer to
WiFi Bridge User Manual
Connect the RJ45 LAN Cable and USB Cable on WiFi Bridge to the RJ45
Port and USB Port on ECU
The ECU needs to have a access of a Dynamic Host Configuration
Protocol (DHCP) IP address which can be connected to the Internet. The
ECU will only search for a DHCP IP address during its power up
sequence. ECU will automatically obtain the IP address, such as:
139.168.200.65, and connect to Internet. If the IP address shows
“60.190.131.228”, it means ECU fails to get IP address. Make sure the
connection between ECU and Router is working well. If not, please
reboot ECU and try to obtain IP address again.
·
Plug the AC power cord into the AC input on the ECU, and then plug the
other end into a standard AC electricity outlet.
Warning: Do not plug any electrical devices and power strip into the same outlet
that the ECU is connected to.
Warning: Do not
plug the ECU into a power strip, surge protector, or
uninterruptable power supply (UPS). The surge suppression or filtering from
these devices can substantially diminish PLC communication performance.
ECU power cord
