CFS300 SERIES OPERATION MANUAL
SECTION 7: REMOTE PROGRAMMING
Entire Contents Copyright
2016 by Adaptive Power Systems, Inc. (APS) • All Rights Reserved • No reproduction without written authorization from APS.
APS CFS300 Series Power Source Operation Manual
Page 108 of 156
7.4
Test Control Command and Query Syntax
The following table lists all available remote control commands in alphabetical order. Each
command is described in more detail in subsequent sections.
Command
Description
AC Program AC Manual DC Program DC Manual Unit
TEST
Execute a Test
Power On
RESET
Reset
Power Off
TD?
Test data
Memory,
Step, Status,
Freq., Volt,
Curr., Power,
Apeak, PF, Q,
CF, VA, Timer
Memory,
Status, Freq.,
Volt, Curr.,
Power,
Apeak, PF, Q,
CF, VA
Memory,
Step, Status,
Volt, Curr.,
Power, Timer
Memory,
Status, Volt,
Curr., Power
RD XX?
Measurement
TDFREQ?
Testing frequency
meter
40.0~1000.0
Hz
TDVOLT?
Testing voltage
meter
0.0~300.0
0.0~420.0
V
TDCURR?
Testing current
meter
See Section 5 for range
A
TDAP?
Testing current peak
meter
See Section 5 for range
A
TDP?
Testing power meter
See Section 5 for range
W
TDPF?
Testing pf meter
0.000~1.000
0.000~1.000
TDQ?
Testing Q meter
See Section 5 for range
TDCF?
Testing cf meter
0.00~10.00
TDVA?
Testing VA meter
See Section 5 for range
VAR
TDTIMER?
Testing timer meter
0.0~999.9
0.0~999.9
s/m/h
METER
{0|1…7|8}
Meter Selection
0=F,1=A,2=P,3
=Q,4=CF,5=AP
,6=VA,7=PF,8=
CYCLE
0=F,1=A,2=P,
3=Q,4=CF,5=
AP,6=VA,7=P
F
1=A,2=P,,8=CY
CLE
1=A,2=P
METER?
Meter Selection
Query
SDTRG
Surge/Drop
/Transient Trigger
Trigger
Transient
Trigger
Transient
STEPCYCLE?
Step Cycle Query
0=Continuous,
1= Off, 0-9999
0=Continuous,
1= Off, 0-9999
MEMORYCYCLE?
Memory Cycle Query 0=Continuous,
1= Off, 0-9999
0=Continuous,
1= Off, 0-9999
LOOPCYCLE?
Loop Cycle Query
0=Continuous,
1= Off, 0-9999
0=Continuous,
1= Off, 0-9999
RR?
Read Reset Input
RI?
Read Output
Interlock
0-1: 0 = CLOSE, 1 = OPEN
EXTP
Trigger External
Trigger one pulse on SYNC Output
Table 8-1: Test Control Command and Query Summary