background image

(6",5”,4))RUNNING BOARD

FOR 1997-2003 Ford F-150/F-250LD Regular Cab (Incl. 04 Heritage)

Rev:20181101

Page 1 of 4

Installation Instructions for IB06EBA1-C

by APS Auto Parts Specialist Inc.

Application: FOR 1997-2003 Ford F-150/F-250LD Regular Cab (Incl. 04 Heritage)

Estimated Time: 1 to 2 hours

Disclaimer: Instructions intended for persons

aged 18+ please do not attempt without adult

supervision. Instructions are not intended to

replace professional installation. Damage

from improper installation, misuse or

modification to the product voids the

manufacturer’s warranty.

Summary of Contents for IB06EBA1-C

Page 1: ...Inc Application FOR 1997 2003 Ford F 150 F 250LD Regular Cab Incl 04 Heritage Estimated Time 1 to 2 hours Disclaimer Instructions intended for persons aged 18 please do not attempt without adult supervision Instructions are not intended to replace professional installation Damage from improper installation misuse or modification to the product voids the manufacturer s warranty ...

Page 2: ...AREFULLY BEFORE STARTING INSTALLATION 2 From under the driver side front of the vehicle remove the oval grommet located on the inside of the rocker panel Figure 1 Insert 1 Offset Double Bolt Plate with threaded studs toward the top into the factory oval hole Figure 2 3 Locate the driver side front Upper Mounting Bracket Hold the Double Bolt Plate from one side while you position and attach the Mou...

Page 3: ...to 7 2 Ib ft 9 Repeat steps 2 8 for passenger Sidebar installation 10 Do periodic inspections of the installation to make sure all hardware is secure and tight To protect your investment wax this product after installing Regular waxing is recommended to add a protective layer over the finish Do not use any type of polish or wax that may contain abrasives that could damage the finish For Polished F...

Page 4: ...ket installation except driver side Mounting Bracket on 97 98 3 door models Centered Double Bolt Plate through top slots in Mounting Bracket 10mm Lock Washers 10mm Flat Washers 10mm Hex Nuts Rear Fig 6 Fig 5 Slip 6mm T bolts into the bottom channel Fig 6 Running Board Installation 2 M6 T bolts 2 M6 Flat Washers 2 M6 Nylon Lock nuts ...

Reviews: