manualshive.com logo in svg

Aprotech GOLUB 45 Series, User Manual, Page: 87 / 105

Share
Download
Aprotech GOLUB 45 Series User Manual Download Page 87

87

APROTECH GmbH 

Rathsbergstrasse 17

90411 Nuremberg / Germany

Trade register:  

Nuremberg HRB 23727

USt.-Id-No.: DE 256 058 089 

D-U-N-S:      31-260-0530

phone: +49 911 / 65 00 79-50 

fax:  

+49 911 / 65 00 79-79

eMail: [email protected]

Web:   www.aprotech.de

Managing Director: 

Peter Jung

Industrial Panel- and Box-PCs

5.2  Driver Installation

The system comes with a “Drivers & Utilities” DVD that offers “one-click” driver installation process. 

It automatically detects your Windows operating system and installs all necessary drivers for you 

system with a single click.

 

5.2.1  Install Drivers Automatically

 

To install drivers automatically, please refer to the following procedures.

 

1.  Insert the “Drivers & Utilities” DVD into a USB DVD-drive connect to your system. A setup 

utility launches and the following dialog appears.

 

Panel-PCs 

&

 Box-PCs

Deutsch

Englisch

Summary of Contents for GOLUB 45 Series










































































































Reviews:

No comments