78
APROTECH GmbH
Rathsbergstrasse 17
90411 Nuremberg / Germany
Trade register:
Nuremberg HRB 23727
USt.-Id-No.: DE 256 058 089
D-U-N-S: 31-260-0530
phone: +49 911 / 65 00 79-50
fax:
+49 911 / 65 00 79-79
eMail: [email protected]
Web: www.aprotech.de
Managing Director:
Peter Jung
Industrial Panel- and Box-PCs
The Power over Ethernet (PoE) setting in the BIOS allows you to enable/ disable the PoE function
of the designated port upon system boot up.
To enable/ disable Power over Ethernet settings:
1. Press
F2
when the system boots up to enter the BIOS setup utility.
2. Go to
[Power]
[PoE Enable]
3. Use the up/ down arrow to highlight and select between Enabled/ Disabled, press
ENTER
to make your selection.
4. When Enabled, you may set each LAN port’s PoE function by selecting Enabled/ Disabled
using the arrow key, press
ENTER
to make your selection.
Enable/ Disable LAN PoE function
Corresponding LAN ports
5. Once set, press F10 to save setting and exit.