Aprotech GOLUB 45 Series, User Manual, Page: 66 / 105

66
APROTECH GmbH
Rathsbergstrasse 17
90411 Nuremberg / Germany
Trade register:
Nuremberg HRB 23727
USt.-Id-No.: DE 256 058 089
D-U-N-S: 31-260-0530
phone: +49 911 / 65 00 79-50
fax: +49 911 / 65 00 79-79
eMail: info@aprotech.de
Web: www.aprotech.de
Managing Director:
Peter Jung
Industrial Panel- and Box-PCs
3.6.2 Powering On Using An External Non-Latched Switch
If your application demands the system to be placed inside a cabinet, you may use an exter-
nal non-latched switch to power on/ off the system. The system provides a 3-pin “Remote
On/ Off” plug for connecting a non-latched switch and acts as the ATX-mode power on/off
control switch. The external non-latched switch acts exactly the same as the power button
on the side panel. To setup and power on/ off the system using an external non-latched
switch (ATX-mode), please follow the steps described below.
1. Acquire a non-latched switch with 3-pin plug.
2. Connect the non-latched switch to the Remote On/ Off plug.
3. With DC power connected, pushing the power button will turn on the system and the
PWR LED indicator will light up. Pushing the button when system is on will turn off the
system. If your operating system supports ATX power mode (i.e. Microsoft Windows
or Linux), pushing the power button while the system is in operation will result in a
pre-defined system behavior, such as shutdown or hibernation.