9
PIC. 11
MANUAL RELEASE
The Aproli 280/700 Strong manual release makes it possible to move the gate manually, in the case of a power failure or during the initial
manual opening and closing tests. The
manual release lever – S
can be accessed by opening the
protection
cover
with the customized
key. Lower the lever in order to release the gate (Pic. 11).
LOWER THE
MANUAL RELEASE
LEVER –
S
TO
RELEASE
MANUAL RELEASE
LEVER -
S
MANUAL RELEASE
LEVER –
S
INSIDE
PROTECTION
COVER
FEATURES AND TECHNICAL SPECIFICATIONS
“Elpro 13 CEI” represents the latest state of the art technology for control panels. It is extremely versatile and can meet the most various
requirements. It is fitted with the “Cut Off Switch” by cover knob.
It has the same functions as “Elpro 9” and incorporates additional advantages as follows: Stroke Reversing Pulse, Pedestrian Operating
Mode (where one leaf only can be operated allowing people to walk in/out), STOP and HOLD function by keeping the remote control
button pressed down. Further improvements can be noted in the “Elpro 13 CEI”:
- Addition of a 1 Amp. fuse to the 24 V circuit as a protection for the accessories (remote control - photocells -etc.) which are connected
to the terminals 12 - 13 and for the panel itself in that it can prevent short circuit during installation.
- The pulse to the electric lock is increased to 2 seconds. Releasing is so much easier as the electric lock is released with an anticipation
of 100 msec. before the gate starts moving.
- A 24 V - 3 W lamp indicates gate operations (Gate CLOSED = Lamp OFF - Gate in OPEN cycle = Lamp flashes slowly - Gate OPEN =
Lamp stays ON without flashing - Gate in CLOSE cycle = Lamp flashes fast).
- It provides a better switching intelligence design to enhance the reliability of the relays.
- The Motor Run Time is independent from the Leaf Delay Time in close cycle (the delay time is automatically added to the duration of
the -opening time).
- The 8 Dip-switches can be arranged into any of the possible patterns to achieve the required operating modes without any risk of
interference with one another.
“STROKE REVERSING PULSE” and “S.1A.P.”
Set Dip-switch No. 7 to ON The ”Stroke Reversing Pulse” (S.R.P.) is activated only with the gate in the CLOSE position. The pulse operates
the gate in the CLOSE direction first and then immediately reverses into OPEN (This will help the gate lock to release). All the other
operations will be performed in the standard way. No danger comes from the Stroke Reversing Pulse. This function remains in service
with the panel set to “Pedestrian Mode”. Set Dip-switch No. 6 to ON for “Pedestrian Mode” (S.1A.P.), terminals 3 - 4. Only one leaf is
operated when the OPEN button is pressed down. Automatic reclosing. If the OPEN button is pressed twice in a row, both leafs are
opened. The S.1A.P. function is activated only when the gate is in the fully CLOSE position. The remote control always operates both
gates, terminals 7 - 8.
The box of ELPRO 13 CEI and its cover are made of weather-proof, shock-resistant plastic material which has a degree of protection
equalling IP 437. The cover is fitted with a knob of quick response in case of an emergency by cutting off the voltage supply.
Summary of Contents for 280/700 STRONG
Page 1: ...G B INSTALLATION MANUAL...
