4
PIC. 4-A
PIC. 4-C
PIC. 5
PIC. 6
SETTING APROLI 280/700 STRONG
In order to install the device, it is firstly necessary to dismantle and expose the individual components; fundamental for both optimal
installation and good performance.
- Swing the lock cover flap placed on the left side of the front
protection cover
to one side (for both the RH and LH Aproli) and open
the
cover
with the customized key provided (Pic. 4-A)
- Remove the
bended arm
by unscrewing the
fixing screws
positioned on the rotation shaft (for both the RH and LH Aproli) (Pic. 4-B)
- Remove the
protection cover
by unscrewing the two fixing
screws – A
on the cover. (Pic. 4-C)
- In order to extract the
electric motor/hydraulic jack assembly
from the
fixing base
, unscrew the four
fixing screws – B
positioned
under the fixing base (Pic. 5)
BENDED ARM AND TELESCOPIC CONNECTION ARM
The
straight arm
should be bolted to the
bended arm
. The straight arm offers various different assembly solutions since it has holes
for connection with the
telescopic arm cover
in 3 different positions (Pic. 6), obtaining a centre distance between the
bended arm
and
the
fixing shoe
equivalent to 460 mm, 520 mm or 580 mm. The
fixing shoe
is attached to a robust gate upright with screws or firmly
welded in place, and is then connected to the adjustable straight arm with one screw.
CUSTOMIZED KEY
FIXING SCREWS FOR
ATTACHING THE BENDED
ARM TO THE ROTATION
SHAFT
RIGHT-HAND
BENDED ARM
PILLAR FIXING BASE
AND BRACKET
PROTECTION
COVER
ELECTRIC
MOTOR/HYDRAULIC
JACK ASSEMBLY
PROTECTION
LOCK
PIC. 4-B
COVER HINGED
DOOR
PROTECTION
COVER
COVER FIXING
SCREWS -
A
ELECTRIC MOTOR/
HYDRAULIC JACK
ASSEMBLY
PILLAR FIXING BASE AND
BRACKET
FIXING SCREWS –
B
ELECTRIC MOTOR/
HYDRAULIC JACK ASSEMBLY
LEFT-HAND
BENDED ARM
STRAIGHT
ARM COVER
LEAF FIXING
SHOE
ADJUSTABLE
TELESCOPIC
STRAIGHT
ARM
CENTRE DISTANCE
460 mm, 520 mm, 580 mm
Summary of Contents for 280/700 STRONG
Page 1: ...G B INSTALLATION MANUAL...
