Industrial micro IDE Flash (MIF) Module - HERMIT Series © 2010 APRO Co., Ltd.
3
2. Product
Specifications
For all the following specifications, values are defined at ambient temperature and nominal supply voltage unless
otherwise stated.
2.1. System Environmental Specifications
Table 1: Environmental Specification
Standard Grade
Industrial Grade
APRO Industrial Hermit Series MIF
SxMIFxxxx-HACSC Series
WxMIFxxx-HAISI- Series
Temperature
Operating:
Non-operating:
0ºC ~ +70ºC
-55ºC ~ +95ºC
-40ºC ~ +85ºC
-55ºC ~ +95ºC
Humidity
Operating & Non-operating:
10% ~ 95% non-condensing
Vibration
Operating & Non-operating:
5g (7 Hz to 2000 Hz, 3 axes),
compliance to IEC 68-2-6
Shock
Operating & Non-operating:
50g (Duration
：
10ms, 3 axes),
compliance to IEC 68-2-27
2.2. System Power Requirements
Table 2: Power Requirement
Standard Grade
Industrial Grade
APRO Industrial Hermit Series MIF
SxMIFxxxx-HACSC Series
WxMIFxxx-HAISI- Series
DC Input Voltage (VCC) 100mV max. ripple(p-p)
+5 V ±10
％
Reading Mode :
Single Channel: 69mA (max.) / Duel Channel: 128mA (max.)
Writing Mode :
Single Channel: 48mA (max.) / Duel Channel: 118mA (max.)
+5V Current
(Maximum average value)
Sleeping Mode :
Single Channel: 1.2mA (max.) / Duel Channel: 1.8mA (max.)
2.3. System Performance
Table 3: System Performances
Data Transfer Mode supporting
- PIO mode : 0,1,2,3,4,5,6 (Default PIO-4)
- UDMA Mode: 0,1,2,3,4,5 (Default UDMA-4)
Data Transfer Rate To/Form Host
16.6Mybtes/sec burst under PIO Mode 4
66.6Mbytes/sec burst under UDMA-4 Mode
Average Access Time
0.2 ms(estimated)
Sequential Read
40 Mbytes/sec Max.
Maximum Performance
Sequential Write
17 Mbytes/sec Max.
Note:
(1). All values quoted are typically at 25oC and nominal supply voltage.
(2). Testing of the Industrial 40/44-pin micro IDE Flash (MIF) Disk Hermit Series maximum performance was performed under the
following platform:
- Computer with AMD 3.0GHz processor
- Windows XP Professional operating system
- IDE transfer mode: Ultra DMA mode 4
- IDE Flash Disk capacity: 4GB
