APRILIA SL 750 SHIVER, Service Station Manual, Page: 17 / 303

FOOTREST UNIT
Name Torque in Nm
TCEI sunken screw fixing Footrest Support to
chassis - M8x30 (6)
18 Nm (13.27 lbf ft)
Non-slip bolt (fit on driver footrest) - M8 (2) 25 Nm (18.44 lbf ft)
Self-tapping TE screw for Footrest finish - M6x12
(8)
10 Nm (7.37 lbf ft)
STAND UNIT
Name Torque in Nm
Screw for Stand - M10x1.25 (1) 10 Nm (10.34 lbf ft)
Lower nut - M10x1.25 (1) 30 Nm (22.13 lbf ft)
Self-tapping TE screw fixing Stand Plate on engine
- M8x30 (3)
25 Nm (18.44 lbf ft)
SWINGARM UNIT
Name Torque in Nm
TCEI screw Swing Arms coupling - M8x70 (7) 25 Nm (18.44 lbf ft)
Swingarm Pin adjustment Bushing (1) 12 Nm (8.85 lbf ft)
Swingarm Pin Ring Nut (1) 60 Nm (44.25 lbf ft)
Chain tensioner set screw (2) -
SERPRESS nut (on chain tensioner pad set
screw) - M8 (2)
-
TPSI screw fixing rear stand bushing - M6x40 (2) 10 Nm (7.37 lbf ft)
TBEI screw fixing chain tensioner pad - M5x12 (3) 3 Nm (2.21 lbf ft)
Self-tapping TBEI screw fixing chain guard, brake
pipe protection and counterslider - M5x9 (5)
4 Nm (2.95 lbf ft)
Calliper support lock pin - M12 (1) 50 Nm (36.88 lbf ft) - Loctite 243
FRONT SUSPENSION UNIT
Name Torque in Nm
Stainless steel TCC screw fixing fork stems on up-
per and lower plates - M8x30 (6)
25 Nm (18.44 lbf ft)
Headstock Ring nut - M25x1 (1) 7 Nm (5.16 lbf ft)
Headstock Cap - M22x1 (1) 100 Nm (73.75 lbf ft)
Screw (fasten on Fork Hub caps) - M8x40 (4) 25 Nm (18.44 lbf ft)
Screw fixing the stem in wheel carrier - M10x1.5
(2)
20 Nm (14.75 lbf ft)
REAR SUSPENSION UNIT
Name Torque in Nm
TCEI screw - M10x50 (1) 50 Nm (36.88 lbf ft)
TCEI screw - M10x59 (1) 50 Nm (36.88 lbf ft)
Nut - M10 (1) 50 Nm (36.88 lbf ft)
ENGINE SMALL PARTS UNIT
Name Torque in Nm
Self-tapping TE screw fixing negative on engine -
M6x12 (3)
10 Nm (7.37 lbf ft)
SL 750 SHIVER
Characteristics
CHAR - 11