Release 00
2003-02
40
Scarabeo 50 I.E.-50/100 4T
CHANGING THE BULB
Carefully read p. 38 (BULBS).
NOTE
Before changing a bulb, check the fuse.
To change the bulb:
♦
Place the vehicle on the center stand.
♦
Unscrew and remove the screw (1).
NOTE
While removing the lens, use extra care to be
sure that you do not break the key.
♦
Remove the lens (2).
♦
Remove the yellow-amber transparent (3).
NOTE
Upon reassembly, position the lens correctly in
its seat.
Tighten the screw (1) moderately and with care to avoid
damaging the lens.
♦
Push the bulb (4) in slightly and rotate it counterclock-
wise.
♦
Extract the bulb (4) from its seat.
NOTE
Insert the bulb in the bulb socket, carefully
aligning the two bulb pins with their guides in the socket.
♦
Correctly install a new bulb of the same type.
NOTE
If the bulb socket (5) has fallen out of its seat,
replace it correctly, ensuring that the slot in the reflector
aligns with the screw hole in the body of the turn signal
lamp.
FRONT AND REAR DIRECTION INDICATORS
CHANGING THE FRONT DIRECTION
INDICATOR
100
♦
Unscrew the screw (1).
♦
Remove the lens (2), the transparent (3) and
replace the bulb (4).
1
3
2
4
100
100
1
3
5
4
2