APRILIA RXV 450 UPGRADE BOOK, Use And Maintenance Book, Page: 87 / 198

MAINTENANCE
3 - 11
SXV / RXV 450 - 550
Parts
After running-
in 3h of use
Every 15h of
use
Every 60h of
use
Every 90h of
use
Check brake system screws tightening
■ ■ - -
Check Spark arrestor
■ ■ - -
Check thickness of brake disks - ■ - -
Check pad thickness
- ■ - -
Treat electric contacts and switches with suitable
spray
- ■ - -
Grease battery connections
- ■ - -
Light operation/direction
■ ■ - -
Check electric system operation ■ ■ - -
Check exhaust system sealing and positioning
- ■ - -
Check tire condition and pressure
■ ■ - -
Check wheel bearings play ■ ■ - -
Check spokes tension and rim flatness
■ ■ - -
Check wheel shafts screws and nut for tightening
■ ■ - -
Check fuel pump
- - - ■
Check engine retaining bolts tightening ■ ■ - -
Check chassis screws and nuts for tightening
■ ■ - -
Fork complete maintenance
- - - ■
Clean fork dust seals
- ■ - -
Bleed fork legs
- ■ - -
Change fork oil
- - - ■
Check fork sealing and operation
■ ■ - -
Check screws of fork plates and wheel shaft pinch
bolts for tightening
■ ■ - -
Shock absorber complete maintenance - - - ■
Check shock absorber shafts for tightening
■ ■ - -
Check shock absorber for sealing and operation
■ ■ - -
Check con-rod bearings play - - - ■
Check steering bearings play
■ ■ - -
Clean headstock dust seal
■ ■ - -
Check chain guide slider for wear
- - - ■
Check chain guide for wear - - - ■
Check chain tensioner roller for wear
- - - ■
Check chain tensioner slider for wear
- - - ■
Tension drive chain ■ ■ - -
Check chain joint (RXV), sealed link (SXV), front
and rear sprocket and chain guide for wear
■ ■ - -
Lubricate steering bearings
- ■ - -
Lubricate clutch lever pin
- ■ - -
Lubricate throttle cables
- ■ - -
Lubricate rider footrest pins
- ■ - -
Lubricate drive chain
■ ■ - -
Lubricate rear suspension lever systems
- ■ - -
Lubricate side stand pin - ■ - -
Lubricate front wheel shaft and bearings
- ■ - -
Lubricate swing arm shaft
- ■ - -
Lubricate rear wheel shaft and bearings
- ■ - -
Notes:
-
Any maintenance performed by the Aprilia specialized service center will not replace the daily checks made by the
rider!
- If any wear exceeds than the tolerance values, or deformation or damages are found after a check, all involved parts
must be replaced
- Clean the vehicle thoroughly before performing any operation
- Using the vehicle on sandy or dusty grounds or in extreme conditions could result in wear of some components
before the scheduled check operation.