41
use and maintenance
RSV 1000 R
- RSV 1000 RFACT
USA
USA
CONTROLS
NOTE
The electrical components function only when the
ignition switch (A) is in the “
” (ON) position.
The parking lights are illuminated as well when the ignition switch
(A) is in the “
” (PARKING) position.
CONTROLS AT THE LEFT HAND GRIP
1)
HORN PUSH BUTTON (
)
The horn sounds when the button is pressed.
2)
DIRECTION INDICATOR SWITCH (
)
To activate the left turn indicator, move the switch to the left. To
activate the right turn indicator, move the switch to the right. To
cancel the turn indicator flashing, press the switch.
3)
DIMMER SWITCH (
-
)
The dimmer switch has two positions:
– push DOWN, low beam “
” position;
– push UP, high beam “
” position.
When the button is in the DOWN position indicated by the
“
”, the parking lights, dashboard light and low beam are
illuminated.
When the button is in the UP position “
” and released,
the high beam is illuminated, the dashboard and parking lights
remain on.
Push and release the button DOWN to return to the low beam
“
”.
4)
HIGH BEAM SIGNALING PUSH BUTTON (
)/LAP
(multifunction)
Press the button briefly to flash the high beam for signaling
when passing, etc. or in the event you need someone’s
attention in an emergency.
This push button, in addition to being the LAP push button, has
the following functions:
– hour and minutes, see page 37 (HOUR SETTING) and
(MINUTES SETTING);
– coolant temperature (°C or °F), see page 37 (COOLANT
TEMPERATURE DISPLAY);
– chronometer, see page 38 (LAP TIMER (RIGHT
DISPLAY)).
(ON)
(ON)
4
1
2
3
A
APRum_RSV1000R##06_####.book Page 41 Monday, February 6, 2006 2:48 PM