en
10
6
Firmware update with SD card
New fi rmware versions extend the functional range and enhance the operation.
The current software can be downloaded from www.resol.de/fi rmware.
In order to run a fi rmware update over the SD memory card slot, proceed as
follows:
Î
Download the fi rmware from the Internet: http://www.resol.com/fi rmware
Î
Insert an SD card formatted with the FAT 32 format into the PC.
Î
Copy the fi rmware update ZIP fi le onto the SD card.
Î
Extract the ZIP fi le on the SD card (the required folder structure will be cre-
ated automatically).
Î
Remove the SD card from the PC and insert it into the SD card slot of the DL2.
The fi rmware update is being run and the DL2 automatically reboots. This may take
a few minutes. The operating control LED starts fl ashing, lights up for a while and
then all LEDs go out.
Î
Wait until the operating control LED is permanently green.
7
Data export
There are 2 different ways to export logged data from the DL2 Datalogger:
1. Export logged data onto an SD memory card. The data are stored as a VBus
®
format fi le and can be read out on a computer using the ServiceCenter soft-
ware.
2. Export logged data onto a computer over the Web interface. Different fi le
formats can be selected.
Information about exporting data over the Web interface can be found in the
detailed manual on the CD included.
7.1
Data export over SD card
In order to copy data onto an SD card, proceed as follows:
Î
Insert the SD card into the SD card slot
The operating control LED fl ashes (green):
The card has been recognised and data are being transferred.
The operating control LED is permanently green:
The transfer is completed. The card can be removed.
8
Ordering software
For an expense allowance of EUR 20,-, a DVD containing the source code and the
compiler scripts of the Open Source applications and -libraries can be ordered.
Please send your order to:
RESOL – Elektronische Regelungen GmbH
Heiskampstraße 10
45527 Hattingen
GERMANY
Please name the version number of the fi rmware in your order. It can be found in
the Web interface, main menu About, sub-menu General, bottom area (e. g.: „1.0
(200805241128)”). Per order, only one version number can be named.
9
Accessories
SD card
Art. no.: 18000741
10 Spare parts
VBus
®
cable, 1.50 m
Art. no.: 750 012 15
Summary of Contents for Datalogger DL2
Page 11: ...en 11...
