Ultra Low-light Color Cameras-- Fixed IP Indoor Mini-Dome
The Alarm Wiring Diagram
The Component Parts (the internal view)
DESE
1. Plug
Inlet:
A DC 12V inlet that connects to an external power supply.
2. Plug
Inlet:
An AC 24V inlet that connects to an external power supply.
3. ETHERNET 10/100 Connector:
This is a standard RJ-45 connector for 10/100
Mbps Ethernet networks. PoE (Power over Ethernet) function: Provides power to
the device via the same cable as used for the network connection.
4. AUDIO
IN:
The connector is used to connect the audio output from other devices
to the camera.
5. VIDEO OUT Connector (RCA):
This output provides the unit’s composite video
signal to a Composite/Analog input. (This connector is used for service to adjust
and improve the image.)
6. AUDIO
OUT:
Provides the camera’s audio signal to a speaker or stereo.
7. GPIO:
This is a 6-PIN connector including the
Digital output/input, DC output
and
GROUND
items
for connecting with external devices.
8. USB
port:
The user can
use a USB device cable to connect the IP camera to the
USB port on the PC.
9. SD/ SDHC CARD slot:
This is used for updating system software and archiving /
accessing critical images.
10. RESET:
Recover to factory default.
1
2
3
4 5
6
7
8
9
10
GND
1
2V+
D
i -
D
i +
D
o -
D
o +
+12V
+12V
1
RMN0100900
