6
2. DESCRIPTION OF THE SURFACE
2.1 The LC-7516 IP Box Camera (PoE)
Front Panel and Rear Panel:
-- Front Panel --
-- Rear Panel --
1
3
2
1/4
＂
-20UNC
1. Light
Sensor:
Registers the quality of light in the camera’s environment, and controls the iris
shuttle to provide better information concerning the light.
2. MICROPHONE:
The IP Camera has an additional audio function. The device has a
microphone built into its front panel which records sound.
3. POWER
indicator:
Indicates the power status of the unit.
4. Plug
Inlet:
A DC 12V inlet that connects to an external power supply.
5. Plug
Inlet:
An AC 24V inlet that connects to an external power supply.
6. ETHERNET 10/100 Connector:
This is a standard RJ-45 connector for 10/100 Mbps Ethernet
networks. PoE (Power over Ethernet) function:
Provides power to the device via the same
cable as used for the network connection.
7. RESET:
Recover to factory default. (Refer to section 2.4 The Reset Button.)
8. VIDEO OUT Connector:
The connector provides the unit’s composite video signals to a
monitor. (This connector adjusts and improves the images.)
9. USB port:
The user can
use a USB device cable to connect the IP camera to the USB port on
the PC.
10. LED indicator:
The green light indicates the unit is activating and the SD card cannot be
removed.
11. AUDIO IN:
The connector is used to connect the audio output from other devices to the camera.
12. SD/ SDHC CARD slot:
This is used for updating system software and archiving / accessing
critical images.
13. GPIO:
This is a 6-PIN connector including the
ALARM IN/OUT, RS-485
,
DC OUTPUT
and
GROUND
items
for connecting with external devices.
14. AUDIO OUT:
Provides the camera’s audio signal to a speaker or stereo.
