Troubleshooting Guide
Symptom
Possible
Problem Notes
Poor Range
Antenna
Whip (or other omni-directional) antennas-Receiver
Antenna connected, vertically oriented and placed
preferably at least 7' high?
Flat Panel or Yagi antennas (directional antennas)-
Receiver Antenna connected, properly directed
towards transmitter, and placed preferably at least 7'
high?
Shifting
colors
Multipath Interference
Locate antennas higher to avoid multipath from people
or vehicle movement
Location
Null
Move position of receive or transmit antennas a few
inches
Doesn't
Work
Power
Check power to equipment (power LED lights?).
If snow can be seen on monitor, then receiver is
working.
RF
Interference
Check Signal Level LEDs for activity with Transmitter
powered off. If activity is present:
Try a different channel
Check equipment operation at a different location
Channel
Match
Transmitter and receiver on same channel?
Connections
Composite video "line in" connected to transmitter,
composite video "line out" connected from receiver to
monitor?
Monitor/TV
Setting
Monitor mode set for viewing "line in" signal?
Applied Wireless products are designed and manufactured
with pride in the United States of America
©
Copyright 2010 by Applied Wireless, Inc. All rights reserved.
Specifications subject to change without notice.
A
PPLIED
W
IRELESS
,
I
NC
.
1250 Avenida Acaso, Camarillo, CA 93012
Phone: 805-383-9600 Fax: 805-383-9001
Email: [email protected]
www.appliedwireless.com
Pub. # UG-VTR900-3
Rev. date 10/22/1010
