Portable Test Equipment
User’s Guide
PTE-UGFW56a-EN
www.appliedp.com
4
1.
Safety Considerations and Instructions
Figure 1 - Portable Test Equipment PTE2300
1.1 Safety Specification
Input Power
Voltage .............. 115 V
– 230 V ±10%, 50 Hz - 60
Hz, 550 VA max.
Operating
.......... IEC 61010-1:2010, IEC 61010-2-
030, CAT II, Pollution Degree 2
Temperature
Operating ............ -10
°C to 40 °C
Relative Humidity
Operating .............
≤95 % at Ta ≤25 °C
Altitude
Operating ............. 2000m maximum
PTE must be powered only from sockets of CAT II. Manufacturer of PTE also provides (upon request)
external safety equipment *** to enable secured power supply from CAT IV overvoltage conditions.
To ensure safety avoid the use of PTE in environment, where rain, excessive dust, excessive heat
may occur and other environments that can compromise the safe use of the device.
©2016 Applied Precision Ltd. All rights reserved.
Product specifications are subject to change without notice. All product names are trademarks of their
respective companies.
Country of Origin: Slovakia
