manualshive.com logo in svg

Applied Biosystems Veriti, User Manual, Page: 68 / 124

Share
Download
Applied Biosystems Veriti User Manual Download Page 68

3-16

Veriti™ Thermal Cycler User Guide

Chapter 3

Performing a Run

Creating a

VeriFlex

™

 Step

Note:

This function is only available for the 96-well versions of the Veriti Thermal 

Cycler.

The Veriti 96-Well Thermal Cyclers have six VeriFlex

™

 blocks. You can specify 

temperatures for each VeriFlex

™

 block, or treat each VeriFlex

™

 block the same (the 

default). The VeriFlex

™

 blocks can be used to provide up to six different temperature 

zones for the 96 wells. A step that has different temperatures for different VeriFlex

™

 

blocks is called a “VeriFlex

™

 step.” This feature is useful for quickly optimizing new 

run methods.

To create a step with different temperatures for

 

the VeriFlex

™

 blocks:

1. Touch a step, then 

Options

.

The options menu appears:

2. In the Options menu, touch 

VeriFlex step

.

The Create a VeriFlex Step screen is displayed:

z

Summary of Contents for Veriti





























































































































Reviews:

No comments