Applied Biosystems Veriti User Manual Download Page 49

Page: 49 / 124

2-13

Veriti™ Thermal Cycler User Guide

Chapter 2

Getting Started

The Edit User screen is displayed:

6. In the Edit User Account screen, make the required changes:

• Touch

Phone

and/or

Email

to edit the contents.

• Touch

Set Access

to change the access level for the user.

• Touch

Set Password

to change the password for the user.

7. Touch

Done

, then

to return to the Manage Users screen.

8. When you finish, touch

(Close) to return to the Admin Menu.

Deleting a User

To delete a user:

1. Log in as a user with Administrator access.

2. In the Main Menu screen, touch

Settings Menu

3. In the Settings Menu screen, touch

Admin Menu

4. In the Admin Menu screen, touch

Manage Users

The Manage Accounts screen is displayed:

Summary of Contents for Veriti





























































































































Search results

Summary of Contents for Veriti

Reviews:

Related manuals for Veriti

Brands by name

Popular brands

Applied Biosystems Veriti, User Manual

Search results

Summary of Contents for Veriti

Reviews:

Related manuals for Veriti

Brands by name

Popular brands