Applied Biosystems Veriti User Manual Download Page 29

Page: 29 / 124

1-9

Veriti™ Thermal Cycler User Guide

Chapter 1

System Overview

Viewing a Run

Method

To view a run method:

1. In the Browse Run Methods screen, touch a run method to select it, then touch

View/Edit

The run method is displayed:

IMPORTANT!

If you are logged on as a Limited User, you can make changes to

the run method but you cannot save it. If you are logged on as a Guest, you can
make changes to the run method but you can only save it to a USB drive.

2. To view:

• Other steps in the run method – Touch the arrow buttons at the end of the

run method.

• View steps with ramp rates – Touch

Options

, then

Ramp Rate

. The fields

showing times update to show the corresponding ramp rates.

3. When you are done, touch

to return to the Browse Run Methods screen.

Summary of Contents for Veriti





























































































































Search results

Summary of Contents for Veriti

Reviews:

Related manuals for Veriti

Brands by name

Popular brands

Applied Biosystems Veriti, User Manual

Search results

Summary of Contents for Veriti

Reviews:

Related manuals for Veriti

Brands by name

Popular brands