manualshive.com logo in svg

Applied Biosystems QuantStudio 6 Flex, User Manual

Share
Download
Applied Biosystems QuantStudio 6 Flex User Manual Download Page 126

1.

If you plan to store the QuantStudio

™

 6 or 7 Flex Real-Time PCR System for more

than a week or you plan to move it, load an unused plate or array card into the

system:

Note: 

The empty plate or array card protects the internal components of the

system during transport or during periods of inactivity lasting more than a week.

a.

Tap   on the touchscreen.

b.

Tap   to eject the tray arm, place a plate or array card onto the plate

adapter, then tap   again to load the plate.

c.

Tap   to place the system in stand-by mode.

2.

Toggle the power button on the rear of the system.

PWR

F1

F2

Ethernet

USB

1

USB

2

RS232

3.

Power off the computer:

a.

Select Start

4

Shut Down.

b.

From the Shut Down Windows

™

 dialog box, select Shut Down, then click

OK.

4.

Power off the monitor.

5.

(QuantStudio

™

 7 Flex System only) If you have a Twister

™

 Robot, toggle the power

button on the rear of the Twister

™

 Robot.

Move the QuantStudio

™

 6 or 7 Flex System

Perform this procedure to safely move the QuantStudio

™

 6 or 7 Flex System short

distances (for example, between laboratories of the same building).

CAUTION! 

PHYSICAL INJURY HAZARD. Do not attempt to lift the

QuantStudio

™

 6 or 7 Flex System or any other heavy objects unless you have

received related training. Incorrect lifting can cause painful and sometimes

permanent back injury. Use proper lifting techniques when lifting or moving

the QuantStudio

™

 6 or 7 Flex System. At least two people are required to lift it.

IMPORTANT! 

Moving your QuantStudio

™

 6 or 7 Flex System can create subtle

changes in the alignment of the instrument optics. Recalibrate the instrument if

necessary.

Prepare the

QuantStudio

™

 6 or

7 Flex Real-Time

PCR System

Appendix D 

Power on or off, store, and move

Move the QuantStudio

™

 6 or 7 Flex System

D

126

QuantStudio

™

 6 and 7 Flex Real-Time PCR Systems v1.6 Maintenance and Administration Guide

Summary of Contents for QuantStudio 6 Flex



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands