manualshive.com logo in svg

Applied Biosystems Data Explorer 4 Series, User Manual

Share
Download
Applied Biosystems Data Explorer 4 Series User Manual Download Page 226

Chapter  5    Examining Spectrum Data

5-22

Applied Biosystems

5

5.3.4  Reverting to Instrument Calibration

The Revert to Instrument Calibration function does the 
following:

•

Mariner data—Reapplies the original calibration 
constants used to acquire the data.

•

Voyager data—Applies default calibration to the data, 
regardless of whether default or external calibration is 
used to acquire the data.

To revert the calibration:

1.

From the Process menu, select Mass Calibration, then 

select Revert to Instrument Calibration.

The spectrum is recalibrated with the original 
calibration constants used during acquisition (Mariner 
data) or default calibration (Voyager data) and 
displayed with an MC trace label. The original and new 
constants are displayed in the Output window.

2.

To save the reverted calibration with the data file, select 
Mass Calibration from the Process menu, then:

If you are 

calibrating

Select

The following occurs

Mariner 
data 
(including 
MS Method 
data)

Apply Calibration

All spectra in the data file are calibrated and 
displayed with an MC trace label. The 
calibration constants are saved with the data 
file. Each spectrum in the data file is 
calibrated when displayed.

Summary of Contents for Data Explorer 4 Series
































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands