manualshive.com logo in svg

Applied Biosystems 3730xl, User Manual

Share
Download
Applied Biosystems 3730xl User Manual Download Page 88

Note: 

If you create an appropriate analysis protocol in the Sequencing Analysis

Software or SeqScape

™

 Software, it will be visible as an option in the plate record for

that field.

Create and manage analysis protocols

1.

In the navigation pane of the Data Collection Software, select  GA

Instruments

4

 ga3730

4

 Protocol Manager.

2.

Use the following functions if needed.

Function

Description

New

See “Create an analysis protocol“ on page 89.

Edit

Opens an existing results group and allows changes.

Duplicate Copies information from an existing protocol to a new protocol.
Delete

Deletes a saved protocol.

IMPORTANT! 

Do not delete the analysis protocol during a run. If

deleted, autoanalysis by Sequencing Analysis Software or SeqScape

™

Software will not be performed.

Import

Imports an XML file.

Export

Saves as an XML file in 

E:\Users\

username

\Documents

.

3.

Click OK.

Chapter 7 

Create and manage instrument protocols, run modules, and analysis protocols

Create and manage analysis protocols

7

88

3730xl DNA Analyzer with 3730xl Data Collection Software 5 User Guide

Summary of Contents for 3730xl











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands