Applied Biosystems 3730xl User Manual Download Page 23

Page: 23 / 170

Secondary analysis software

Secondary analysis software is available on the Thermo Fisher Cloud and for desktop

computers.
Visit thermofisher.com/cloud for the latest available secondary analysis applications.

Thermo Fisher Cloud secondary analysis apps

Analysis

App

Description

Sequencing

Quality Check (QC) module

• Automatically checks sequence trace quality.
• Provides a results summary that is based on quality

parameter settings.

• Auto-flags lower-quality traces for further inspection.

Variant Analysis (VA) module

• Finds variants in samples that are sequenced on Applied

Biosystems

™

genetic analyzers.

• Reports variants at genomic coordinates.
• Allows export of variant calls in standard Variant Call

Format.

‑

generation Confirmation

(NGC) module

• Confirms next-generation sequencing (NGS) variants

using CE technology.

• Allows visualization of the variants that are detected by

both NGS and CE platforms.

• Allows export of confirmed variants in standard Variant

Call Format.

Fragment analysis

Sizing Analysis Module Peak

Scanner

™

Software

Performs peak sizing.

Microsatellite Analysis

Software

Analyzes a mixture of DNA fragments, separated by size, and

determines the microsatellite alleles present in the sample.

Chapter 1

Instrument and software description

Secondary analysis software

3730xl DNA Analyzer with 3730xl Data Collection Software 5 User Guide

Summary of Contents for 3730xl











































































































































































Search results

Summary of Contents for 3730xl

Reviews:

Related manuals for 3730xl

Brands by name

Popular brands

Applied Biosystems 3730xl, User Manual

Search results

Summary of Contents for 3730xl

Reviews:

Related manuals for 3730xl

Brands by name

Popular brands