manualshive.com logo in svg

Applied Biosystems 3730xl, User Manual

Share
Download
Applied Biosystems 3730xl User Manual Download Page 162

Reference

Description

FCC Part 15 Subpart B (47 CFR)

U.S. Standard Radio Frequency Devices
This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions,

may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio

or television reception, which can be determined by

turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit

different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV

technician for help.

Environmental design standards

Reference

Description

Directive 2012/19/EU

European Union “WEEE Directive”—Waste electrical and electronic equipment

Directive 2011/65/EU

European Union “RoHS Directive”—Restriction of hazardous substances in electrical

and electronic equipment

SJ/T 11364-2014

“China RoHS” Standard—Marking for the Restricted Use of Hazardous Substances in

Electronic and Electrical Products
For instrument specific certificates, visit our customer resource page at 

www.thermofisher.com/us/en/home/technical-resources/rohs-certificates.html.

Appendix F 

Safety

Safety and electromagnetic compatibility (EMC) standards

F

162

3730xl DNA Analyzer with 3730xl Data Collection Software 5 User Guide

Summary of Contents for 3730xl











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands