Applied Biosystems 3730xl User Manual Download Page 157

Page: 157 / 170

Conformity mark

Description

Indicates conformity with Australian standards for electromagnetic

compatibility.

Indicates conformity with the WEEE Directive 2012/19/EU.

CAUTION!

To minimize negative environmental impact from

disposal of electronic waste, do not dispose of electronic

waste in unsorted municipal waste. Follow local municipal

waste ordinances for proper disposal provision and contact

customer service for information about responsible disposal

options.

Safety information for instruments not manufactured by Thermo

Fisher Scientific

Some of the accessories provided as part of the instrument system are not designed or

built by Thermo Fisher Scientific. Consult the manufacturer's documentation for the

information needed for the safe use of these products.

Instrument safety

CAUTION!

Do not remove instrument protective covers. If you remove the

protective instrument panels or disable interlock devices, you may be exposed

to serious hazards including, but not limited to, severe electrical shock, laser

exposure, crushing, or chemical exposure.

CAUTION!

Moving Parts. Moving parts can crush, pinch and cut. Keep hands

clear of moving parts while operating the instrument. Disconnect power before

servicing.

General

Physical injury

Appendix F

Safety

Safety information for instruments not manufactured by Thermo Fisher Scientific

3730xl DNA Analyzer with 3730xl Data Collection Software 5 User Guide

157

Summary of Contents for 3730xl











































































































































































Search results

Summary of Contents for 3730xl

Reviews:

Brands by name

Popular brands

Applied Biosystems 3730xl, User Manual

Search results

Summary of Contents for 3730xl

Reviews:

Brands by name

Popular brands