Applied Biosystems 3500 User Manual Download Page 94

Page: 94 / 326

Review previously run fragment analysis/HID samples

If you access the Results screen when no run is in progress and no plate is linked, no

samples are listed. (If the plate from the most recent run is linked, the results from

that plate are displayed.)
To view results for samples other than those from the most recent run, click , then

select the samples to review.
By default, the Fragment Samples view is selected. If you are importing HID files,

click HID Samples.

Review sample quality

In the samples view, click the Table Settings button, then specify the columns to

show or hide.

Double-click Offscale, Pull-Up (fragment), Broad Peak (HID), and SQ columns

to sort suspect and failing flags to the top of the table. Multi-column sorting is

supported (see “Sort by one or multiple columns“ on page 76).

Chapter 5

Review fragment/HID analysis results

Review previously run fragment analysis/HID samples

3500/3500xL Genetic Analyzer User Guide—Data Collection Software v3.1

Summary of Contents for 3500







































































































































































































































































































































Search results

Summary of Contents for 3500

Reviews:

Related manuals for 3500

Brands by name

Popular brands

Applied Biosystems 3500, User Manual

Search results

Summary of Contents for 3500

Reviews:

Related manuals for 3500

Brands by name

Popular brands