Dura-Spark L80 Operation Manual
SPK-L80-8000/A
__________________________________________________________________________________________________________
___________________________________________________________________________________________________________
Page
16
of
20
8.
Deployment / Installation
The towing bridle should be secured to the catamaran using two stainless
shackles on the two lower tow points and connected to the HV Cable Grip.
The cable tow point should be adjusted so that no load is applied to the
electrical connections or cable clamp.
A quick sea trial should be undertaken to check the floatation / towing
characteristics of the catamaran underway at roughly 3-5 Knots.
Note:
No stress should be applied to the electrical connections whilst the
unit is undertow as this may cause failure during operation.
Summary of Contents for Dura-Spark L80
Page 1: ...Dura Spark L80 Operation Manual ...
Page 20: ......