24
AT851 Battery Aging Tester
automatically at next power up.
To save/load/erase file:
Press
File
key at normal operation state, File operation page appeared:
Figure 4-11
File Operation Page
Table 4-5 File Operation
FILE
SAVE
Save
LOAD
Load
ErASE
Erase
Procedures for saving setting into selected file number
Step 1. To choose a file by knob, such as File No.19.
If selected file is empty, “
NULL
” displayed on display #3.
Step 2. To select item “
SAVE
” by
<
or
>
Step 3. Press
Enter
key to save settings into selected file.
4.9
Display Power or Resistance Measurement Result
After the load input turned ON, the display #3’s measurement result can be switched
by
<
or
>
key:
Current Meas. Value [I]
Power Meas. Value [P]
Resistance Meas. Value [R]
Battery Meas. Capacity [B]. (Availability in Battery Testing Function)
Battery discharge time [T]. (Availability in Battery Testing Function)
4.10
Menu
The menu settings will be saved into internal non-volatile memory automatically.
These Settings will be loaded at next power up.
Table 4-6 Menu operation
[Menu] [Press
Shift
+
Menu
]
RECALL
Power-On File Recall
OFF
ON
The last saving file will be loaded at next power up.
KNOB
Setup rotary knob state
OFF
Knob cannot be used
1
Step 0.001
10
Step 0.01
100
Step 0.1
SHRT.CT
Fast load file0~9 by using numeric key 0 thru 9
OFF
ON
SENSE
Remote Sense. Setup voltage measurement mode.
