12
AT851 Battery Aging Tester
Figure 3-4 Keypad II
Table 3-2 Keypad description
Key
Description
I-Set
Set up a constant current from 0 to Max current. “CC” will be shown on Display #3.
Shift+I-max
Set up Max current value. The I-Max setup page will be displayed.
V-Set
Set up a constant voltage from 0 to Max voltage. “CV” will be showed on Display #3
Shift+V-max
Set up Max voltage value. The V-MAX setup page will be displayed.
P-Set
Set up a constant power from 0 to Max Power. “CP” will be showed on Display #3.
Shift+P-max
Set up Max power value. The P-Max setup page will be displayed.
R-Set
Set up a constant resistance from 0 to 4000
Ω
. “CR” will be showed on Display #4
Shift+V-On/Off
Set up Von value and Voff value for Von/Off operation. “VLMT” indicator will be
showed on VFD.
File
File Save/Read/Erase Operation. The FILE setup page will be displayed.
List
Sequence List Operation. The LIST setup page will be displayed.
Rotary knob to adjust the value in Test and Setup mode.
Rotary knob to choose menu in menu mode.
Choose menu item.
Esc
Escape
Enter
Enter.
Shift+Battery
Battery Testing Mode. The “BAT” will be showed on Display #3.
Shift+Short
Short circuit Operation Mode. The “SHT” will be showed on Display #3.
Shift+Tran
Enter Transition Operation Mode. The “TRN” will be showed on Display #3
Shift+ S-Tran
Set up the transition parameter.
Shift+Timer
Load on Timer Operation Mode. The “DELAY” indicator will be showed.
Shift+Menu
Menu List Page.
3.4
Real panel
Figure 3-5 Real panel
