AT381x User's Guide
80
Query Syntax
COMParator:TOLerance:BIN? <n>
Parameter
Where,<n> is:
NR1 (1 to 9): Bin number
Query Response
<NR3:low limit>,<NR3:high limit>
Example
SEND> COMP:TOL:BIN? 2
RET>
1.000000e-06,2.000000E-6
10.12.7
COMParator:SLIM
The COMParator:SLIM or COMParator:secondary command sets the LOW/HIGH limit values
for the secondary parameter.
Command Syntax
COMParator:SLIM <low value>,<high value>
COMParator:secondary <low value>,<high value>
Parameter
Where, <low value>,<high value> is:
<low value>
NR1,NR2 or NR3: low limit value
<high value>
NR1,NR2 or NR3: high limit value
A suffix multiplier can be used with this command.
Example
SEND> COMP:SLIM 0.0001,0.0010
Query Syntax
COMParator:SLIM?
COMParator:secondary?
Query Response
<NR3:low limit>,<NR3:high limit>
Example
SEND> COMP:SLIM?
RET>
1.000000e-04,1.000000e-03
10.12.8
COMParator:BEEP
The :COMParator:BEEP command sets beep mode of the comparator function.
Command Syntax
COMParator:BEEP {OFF,PASS,FAIL}
Parameter
Where,
OFF
Turns the beeper off.
PASS
Sounds a beep when the test is passed (BIN1~BIN9).
FAIL Sounds a beep when the test is failed (OUT).
Example
SEND> COMP:BEEP PASS
Query Syntax
COMParator:BEEP?
Query Response
{OFF,PASS,FAIL}
Example
SEND> COMP:BEEP?
RET>
OFF
10.12.9
COMParator:OPEN
The :COMParator:OPEN command selects the open condition for main parameter.
Command Syntax
COMParator:OPEN {OFF,2,5,10,20,50}
Parameter
Where,
OFF
Turns the beeper off.
2,5,10,20,50 The percent range value
Example
SEND> COMP:OPEN 2
Query Syntax
COMParator:OPEN?
Query Response
{OFF,2,5,10,20,50}
Example
SEND> COMP:OPEN?
RET>
OFF