57
File Operation
Soft key
Function
INT MEMORY Internal flash memory
USB
MEMORY
USB storage
7.1.2
Recall a File at Startup [AUTO RECALL]
Users can recall file 0 or current file at the instrument starts up by setting the [AUTO RECALL]
field.
To select auto recall file
Step 1
Press the [Meas] or [Setup] key followed by [FILE] soft key at bottom and then enter <FILE>
page.
Step 2
Use the cursor key to select [AUTO RECALL] field
Step 3
Use the soft keys to select.
Soft key
Function
File 0
The data of file 0 is always loaded when startup.
Current file
The data of the current file is loaded when startup.
7.1.3
Auto save data to last file [AUTO SAVE]
You can save the modified data into last used file when the instrument power key is pressed.
To turn on/off the AUTO SAVE function
Step 1
Press the [Meas] or [Setup] key followed by [FILE] soft key at bottom and then enter <FILE>
page.
Step 2
Use the cursor key to select [AUTO SAVE] field
Step 3
Use the soft keys to select.
Soft key
Function
ON
Auto save function will be enabled. The data will be saved after the power
key pressed.
OFF
Turn off the auto save function.
7.1.4
File operation
To choose a file to operate
Step 1
Press the [Meas] or [Setup] key followed by [FILE] soft key at bottom and then enter <FILE>
page.
Step 2
Use the cursor key to select [FILE] field
Step 3
Use the soft keys to select.
Soft key
Function
SAVE
Save user configuration data into current selected file.
RECALL
Load current file data into the system
ERASE
Delete all data of the current file, and the file is also cleared at the same time.
MODIFY DES
Modify the file description.
NOTE
Deleted files, if automatically recalled at startup, the system will create a file with factory
settings.