Troubleshooting
42
Apollo GX50/60/65 Installation Manual
Table 4 Troubleshooting Guide
Problem
Cause
Solution
Display flashes from power
interrupts
Caused by momentary power
interruptions in the electrical system,
typically due to changing power
sources.
This is normal operation of the
GX50/60/65, operation recovers in
approximately 1 second. If it becomes
a problem, check the electrical
system.
C
ONTACTING THE
F
ACTORY FOR
A
SSISTANCE
If the Apollo GX50/60/65 unit fails to operate despite troubleshooting efforts, contact the
II Morrow factory for assistance.
II Morrow Inc.
2345 Turner Rd. SE
Salem, Oregon 97302
USA
Phone (503)581-8101 or 1-800-525-6726
Be prepared with the following information about the installation:
•
Installation configuration (accessories, antenna, ...)
•
Model number, part number with mod levels, and serial number
•
Software versions
•
Description of problem
•
Efforts made to isolate the problem
•
other installed avionics
Summary of Contents for GX50
