9
English
4 Initial use
Please charge the Bluetooth audio receiver fully before using it for the first time.
For this purpose connect the device using the supplied microUSB cable to a suita-
ble charging source like for e.g. a computer or USB charging adapter.
The LED display is illuminated in red during the charging process. Once this
switches off, the device is fully charged. Please unplug the device from the power
source after charging in order to avoid constant recharging.
Then, connect the audio receiver using the foldable 3.5mm jack. The integrated
battery allows up to 8 hours of playback without a charging source.
Please charge the battery fully once again, if the receiver switches off in battery
mode or if it cannot be switched on.
You can stop and start the music by pressing the multi-functional button.
5 Establishing a connection
Switch the Bluetooth audio receiver on. Press and hold the "multi-functional" but
-
ton for about 5 seconds. This is located at the centre of the device on the front.
The LED display on the front flashes in blue.
The Bluetooth audio receiver is now in pairing mode.
Enable the Bluetooth interface on your audio playback device (E.g. on your
Smartphone) and perform a search. Then pair the device using "aplic-301784".
The connection has now been established successfully with the Bluetooth audio
receiver.
Note: Switch off the audio receiver for about 20 seconds and try to pair again if
the connection could not be established.