Aplex ARCHMI-9 Series User Manual Download Page 86

Page: 86 / 113

ARCHMI-9XX Series User Manual

This chapter describes how to install drivers and other software that will allow your
touch screen work with different operating systems.

5.1

Windows 7/8/8.1 Universal Driver Installation for

PenMount 6000 Series

Before installing the Windows 7/8/8.1 driver software, you must have the Windows

7/8/8.1 system installed and running on your computer. You must also have one of

the following PenMount 6000 series controller or control boards installed: PM6500,

PM6300.

5.1.1 Installing Software(Resistive Touch)

If you have an older version of the PenMount Windows 7 driver installed in your

system, please remove it first. Follow the steps below to install the PenMount

DMC6000 Windows 7 driver.

Step 1.

Insert the product CD, the screen below would appear. Click

Touch Panel

Driver

from the list.

Summary of Contents for ARCHMI-9 Series


















































































































Search results

Summary of Contents for ARCHMI-9 Series

Reviews:

Related manuals for ARCHMI-9 Series

Brands by name

Popular brands

Aplex ARCHMI-9 Series, User Manual

Search results

Summary of Contents for ARCHMI-9 Series

Reviews:

Related manuals for ARCHMI-9 Series

Brands by name

Popular brands