Be sure to turn AUTO
LIGHT systems OFF. Fail-
ure to do so may cause the
lights to stay on after the
engine has been shut off.
This may kill the battery.
Be sure to test unit operation
and safety wire operation
after installation.
Never use this unit on a
vehicle that is not intended
for use.
We cannot guarantee proper
operation of this unit on non
application vehicles.
Be sure to secure this unit in
a safe location away from the
driver .
Failure to do so may lead to
accidents.
Do not expose the unit to
excessive shock.
This could lead to unit
malfunction.
Please in tall with our
recommended harness.
If you have any inquiry for
the harness please contact to
your shop.
Always connect the hand
brake wire.
Failure to do so may lead to
accidents.
Be sure to shut off the engine
when sleeping inside the
vehicle
Failure to do so may result in
exhaust poisoning
Never leave the vehicle
while the engine is running
This could lead to accidents
This product is designed for
domestic use only.
It must not be used in any
other country.
Be sure that the unit has
been properly connected
when selling the vehicle.
Also, be sure to provide the
instruction manual to the
new user.
お願い
Remote Door Lock Sys-
tems and Adjustable Steer-
ing Columns may not func-
tion properly after installa-
tion of this unit.
Considerations
●
Be sure to check the contents before attempting installation.
●
Please notify your dealer of purchase for any missing or broken parts BEFORE
attempting installation.
Parts List
Serial Number
…１
Installation Procedures
●
Checking the Safety Switch
（
Parking Brake Switch
）
1. Pull the parking brake, start
the engine, and make sure
the IG key is ON.
2. Set the Timer to a random
setting above 30 seconds.
3. Turn the IG key OFF to acti-
vate the Timer countdown.
4. Release the parking brake
during the countdown proc-
ess.
5. Be sure the engine shuts
completely off.
Be sure to use a proper tools when splicing.
Failure to do so may lead to faulty connections.
Double Sided Tape
…１
Securely fasten
with plier
Product Features
２
●
This unit will work on any 12V
vehicle.
●
Ｏ
２
sensor voltage・Ａ／Ｆ value
can be displayed.
●
Displays A/F ratio as RICH or
LEAN via 2 colors LED
●
Displays battery voltage .Also
warns of extremely LOW battery
voltages。
●
16 way adjustment of Count
down timing from 0-10 minutes.
●
Automatic countdown feature. In
order to ensure the most optimum
countdown setting from the wid-
est array of vehicles, the user can
choose from 144 different set-
tings.
●
First Timer to utilize Ｏ
２
sensor
voltage when calculating count
down time. Compared to timers
that only use vehicle speed and
RPM, this TIMER can set the most
accurate after idling time possible.
●
Parking
Brake safety
switch
３
Control Unit
…１
AT3000-0000
Relay and Control Unit Installation
Please
This product is designed to install with harness which we recommended.
It is harness any our recommended harness when install.
４
1. Disconnect the negative
terminal of the battery.
2. Pull the harness coming
from the key cylinder. (In
some vehicles, the whole key
cylinder is a harness)
3. Insert the installation har-
ness between the cylinder
and harness .
4. Connect the 3 prong Timer
harness to the relay.
5. Splice the black ground wire
from the relay into the En-
gine ECU ground wire.
( Please refer to the vehicle
specific wiring diagram. )
When not using the Ｏ
２
sen-
sor, A/F ratio monitor, and
automatic after idling func-
tions, connect the ground
wire connector to the chas-
sis.
6. Splice the white wire from
the relay（Ｏ
2
sensor sig-
nal）into the Ｏ
２
sensor wire
from the ECU.（Refer to
diagram charts.）
7. Splice the gray parking
brake wire from the relay to
the parking brake switch.
（With the IG key ON, be
sure to check that the park-
ing brake switch reads 0 V
when the parking brake is
up, and 12V when the
brake is down.)
●
Installing the Relay
●
Mounting the Control Unit
1. Use the included double
sided tape to mount.
2. Mount in a location that
does not interfere with driv-
ing. Connect to relay.
3. Reconnect battery.
Do not mount the unit near high temperatures, dust, or under direct
sunlight.
When mounting with double sided tape, take care not to damage the
case when relocating.
Please
Be sure to remove all oil and debris from unit before mounting.
Never pull hard on any connectors or harnesses.
Vehicle Specific Chart
…１
Instruction Manual
…１
Relay Unit
…１
Control Unit
…１
Zip Tie
…2
Fitting
…１
Splice
…2
Electro-Tap
…1
How to use the Electrotaps (Parking Brake Switch)
Insert wire
Insert wire to be
tapped
■
How to Splice the Wire
Thank you for purchasing this product.. Please read all of this manual to en-
sure proper usage. Also, please keep this manual in a safe place for future
reference. Be sure to provide this manual to the next user in case of ownership
change.
Instruction Manual
Instruction Manual
Instruction Manual
■Vehicles that cannot use the A/F function
・Titanium type Ｏ
２
sensor vehicles
（BNR32 Skyline GT−R,（R)PS１３ Silvia/180ＳＸ（ʻ91.1〜ʻ93.10）etc）
■Vehicles that cannot utilize the auto idling feature
・Vehicles that cannot use the A/F function
・Vehicles that do not read an A/F near 14.6 during idle
・Ｏ
２
sensors that warm up slowly（reads“---”in display）
No.
Print Date
Instruction Manual Ver.
#
Notes
1
8-25-2000
7407-0260-00
1
2
3-10-2004
7407-0260-01
2
3
5-20-2005
7407-0260-02
3
Part Name
APEX AUTO TIMER
Part Code
405-A011
Purpose
Engine After-Idling unit
Application
DC12V Body Ground Autos
Version Information
Never operate this unit
while driving.
Failure to do so may lead to
accidents.
Do not use this product for
any other purpose than the
one listed in this manual.
We are not responsible for
any damages or injuries
incurred from improper
usage of this product.
Discontinue use of this
product immediately if any
unusual odor or smoke
comes from the unit.
Failure to do so may result in
electrical shorts and poten-
tial engine fire.
For safe use of this
product, be sure to read
the Safety Precautions.
Keep the manual in a safe
place after use for future
reference. We have
included these warnings
to protect the user and
dealer from unnecessary
harm. These points have
been marked throughout
this manual by SIGNAL
WORDS. Please refer to
the table on the left for a
glossary
of
term
meanings.
Safety Precautions
１
This product should ONLY
be installed by a professional
installer.
Installation requires past
experience to prevent dam-
age to the unit and vehicle.
Never disassemble or
tamper with this unit.
This could lead to serious
injury.
Do not leave the engine
running in closed garages or
sealed areas.
Failure to do so may lead to
exhaust fume poisoning.
■
GLOSSARY
警告
！
注意
！
Failure to do so may result in
death or severe injury to the
user and others.
Failure to do so may result in
light injury to the user and oth-
ers or product and engine dam-
age.
Failure to do so may result in
product and engine damage.
Display
Meanings
PLEASE
WARNING
CAUTION
APEXERA Co.,Ltd.
http://www.apexera.co.jp
Head office
:
1-17-14 Tanashioda,Sagamihara-city Kanagawa,229-1125 JAPAN
ph: +81-42-778-3991 fx+81-42-778-4495
USA office
A’pex Integration,Inc.
:
330W
.
Taft Orange,CA.92865,USA
ph : (714)685-5700
fx : (714)685-5701
ELECTRONICS TECHNOLOGY
ELECTRONICS TECHNOLOGY
ELECTRONICS TECHNOLOGY
■
Installation Diagram
Controller
Key Swich
Perking Brake Switch
Relay
Vehicle Specific Harnes
（
Sold Separately
）
Engiine
ECU
O
2
Sensor Signal(White Wire)
Ground(Black wier)
Ground
(Black Wire)
When not using
O
2
Sensor Signal.
(Glay Wire)
R e d:12V+ Constant
Blue :IG2 Output
Green:IG1 Output