Compatible models for PH60-E replacement probe:
PH60, PH60F, PH60S, PC60
How to replace the probe?
Screw off the probe ring, unplug the probe, plug in the new
replacement probe (pay attention to the probe’s position), and
screw on the probe ring.
The liquid inside the probe cap is 3M KCL storage solution
(SKU: AI1107). It helps keep the spear p
H sensor’s accuracy.
The sensor must be always stored in this storage
solution when not in use.
If it gets contaminated, replace it
with new ones. (Using oth
er brands’ storage solution could
cause potential damage to the probe)
Go to www.aperainst.de to watch some tutorial videos.
We warrant this electrode to be free from defects in material and workmanship and
agree to repair or replace free of charge, at option of APERA INSTRUMENTS (Europe)
GmbH any malfunctioned or damaged product attributable to responsibility of APERA
INSTRUMENTS (Europe) GmbH for a period of
six-month
. This warranty does not
apply to defects resulting from actions such as misuse (violation of the instructions in
this manual or operations in the manner not specified in this manual), improper
maintenance, or unauthorized repairs. Warranty period is the time limit to provide free
service for the products purchased by customers, not the service life of the probe.
APERA INSTRUMENTS (Europe) GmbH
Wilhelm-Muthmann-Straße 15
42329 Wuppertal, Germany
Tel. +49 202 51988998
www.aperainst.de
