8
Part3:Camera warm tips
1.The battery of the cam is only for emergence file back up. External power is
required for operation.when recording, charging the dash cam all the time is
necessary.
2.If you want the screen stay on all the time, simply turn on the
screensavor
function on the menu.
3.If you want to achieve long time parking function,
hardwire
kit is
needed.(Asin:B07V3BLNZ2).
4.It’s forbidden to take off SD card when recording, it may cause file corrupted.
5.Avoid exposing your device to excessive cold or heat. Extreme temperatures
can damage the device and reduce the charging capacity and life of your device.
Your device is recommended for use within a temperature range of -10
°
C to
60
°
C.
6.Red light on means the camera charging, blue light blinking means camera
recording.
7.We suggest not to turn on motion detection features while driving, this function
may make recording intermittent. If the video files can be playback normally on
the dash cam, but it shows as blank or corrupted on PC, please change a card
reader or video player.
8.The
USB cable
is used to transfer the file or use it worked as a pc camera. Therefore,
when using the USB cable to connect it, it will show three options. "Mass storage"
is to transfer the file from camera to computer. "PC camera" is to use this camera as a
pc camera. "RED mode" is to use this camera. Please select the
“
Red mode
”
then
you can enter into the screen.
9.We provide camera
Firmware
, such as
night vision firmware
, image color
firmware. Contact our email to get firmware for free.
Please note that we only recommend updating your firmware if you experience
issues with your camera. Installing incorrect firmware can damage your device.
10.APEMAN provides
FREE camera accessory
-suction cup, car charger,3M
sticker If you need it, we are willing to give you.
