- 5 -
3. Getting to Know the Camera Body
A. Interfaces
There are 5 interfaces:
Hard Reset Hole: If your camera doesn't turn on while charging,
you can insert the pin provided into the pinhole for about three
seconds. This will hard reset the camera. If the camera can be
turned on, you can reset it in the menu.
MicroSD Card Slot: Slide the compatible card into the slot in the
right direction (with the metal contact going into the slot first and
away from you) until it clicks into place. If you feel the MicroSD
card cannot be inserted into the place, please use your fingernail
to push the card in.
Rear Cam: Please make sure to connect the original car charger,
confirm you set the Display Mode as Split-screen or Picture in
picture. Then unplug your rear camera and re-connect it to your
dash cam if the rear camera not showing on the screen.
Mic: Microphone
Micro USB Port: This should be connected to the micro USB
connector of the car charger cable provided in the package. The
other end of the car charger cable is connected to the cigarette
lighter.
