APCON, Inc.
48
A54-3144-XR • Rev B
Chapter 5. Configure the chassis
ACI-3144-XR Chassis User Manual
Configuration > LAN
n
IPv4 address
The following steps describe how to set the IPv4 address for the LAN1 port on the chassis.
These same instructions apply to the optional LAN2 port.
1. On the
IPv4 Menu
, press
DOWN
until the
LAN1 IPv4 Addr
menu option is selected,
then press
ENTER
. The following screen is displayed:
2. To set the desired IP address, use the
CANCEL
and
ENTER
buttons to position the
cursor over the first digit you want to change.
• To move the cursor to the right, press
ENTER
.
• To move the cursor to the left, press
CANCEL
.
3. When the cursor is positioned over a digit you want to change, press either
UP
or
DOWN
to increase or decrease the value.
4. When the desired digit is displayed, press
ENTER
to confirm the setting and move the
cursor to the right over the next digit.
5. Repeat the steps above until the desired IP address is displayed.
6. When the desired IP address is displayed, press
ENTER
to confirm.The chassis verifies
the IP address and displays one of the following icons:
7. The
IPv4 Menu
is redisplayed. To save the IP address, press
DOWN
repeatedly until
the
Save Changes
menu option is marked on
IPv4 Menu,
and then press
ENTER
.
Configuration > LANn IPv4 netmask
The following example sets the LAN1 IPv4 netmask on the chassis.
The IP address is valid.
The IP address is not valid.
