APCON, Inc.
28
A54-3144-XR • Rev B
Chapter 3. Specifications and compatibility
ACI-3144-XR Chassis User Manual
Following are the characteristics for SFP+ and QSFP transceivers that can be ordered from
APCON
for an I
NTELLA
F
LEX
XR chassis:
Port numbering
The port designation is preceded by the blade position; for example, if the blade is in Slot
A in the chassis, the aggregation ports are labeled A1, A2, and so on.
• On an ACI-3033-S14-1 I
NTELLA
S
TORE
II blade, the Channel Ports are labeled as
ACH1 or ACH2.
• On an ACI-3030-T05-1 Bypass Tap blade, the port numbering conventions are
different due to the function of the blade. See that blade’s User Manual for a
complete description of Network and Appliance Ports and port numbering.
An I
NTELLA
F
LEX
XR chassis uses the following conventions to identify each port:
• Blades are labeled on the right side of the chassis with an alpha character,
starting with the letter “A” in the bottom slot.
• Port labels within the blade use numbers for each port, starting at the left. A blade
may have up to 36 ports per blade. For blades with ports in two rows, the ports are
numbered top to bottom, then left to right.
• In software, the ports on the blade in slot A are referred to as A01, A02, etc. The
ports on the blade in slot B are referred to as B01, B02, etc.
The following diagram illustrates port numbering and labeling conventions. Notice that the
blade in Slot A has 36 ports and the blade in Slot B has only 32 ports.
Transceiver
Transmit power (nominal)
Receiver sensitivity
ACI-0201-200-R
• 10 Gbps Dual-Rate
• Single-Mode SFP+
–11.0 dBm to –3.0 dBm
for 1G operation
–8.2 dBm to +0.5 dBm for
10G operation
–19.0 dBm @ 10.3 Gbps
for 1G operation
–12.6 dBm @ 10.3 Gbps
for 10G operation
ACI-0201-199-R
• 1/10 Gbps Dual-Rate
• Multi-Mode SFP+
–5.6 dBm to –3.0 dBm
–5.4 dBm @ 10.5 Gbps
ACI-0240-195-R
• 40 Gbps QSFP+
• Single-Mode
–4.0 dBm to –3.5 dBm
(per lane)
–11.5 dBm @ 10.3 Gbps
(per lane)
ACI-0240-196-R
• 40 Gbps QSFP+
• Multi-Mode
–5.6 dBm to –3.0 dBm
(per lane)
–5.4 dBm @ 10.5 Gbps
(per lane)
ACI-0240-197-R
• 40 Gbps bi-directional QSFP+
• Multi-Mode
–4.0 dBm to +5.0 dBm
(per lane)
–6.0 dBm to +5.0 dBm
(per lane)
