Apantac OG-US-4000 Series, User Manual, Page: 9 / 18

APANTAC LLC www.apantac.com 7
OG-US-4000 User Manual
Mode:
The OG-US-4000’s video input is not auto-detecting. The card must be configured for which input to pro-
cess.
The mode choices are:

SDI to SDI conversion ; chooses the SDI video input signal for conversion to both HDMI and
SDI outputs.

HDMI to SDI conversion; chooses the HDMI video input signal for conversion to both HDMI
and SDI outputs.
(For HDMI sources requiring HDCP, contact Apantac Technical Support.)

Test Signals; generates a color-bar test pattern on both outputs.
Output Format:
This option configures the resolutions and refresh rate of the output video signals.
Options are:

1080p @ 59.94 Hz

1080p @ 50 Hz

1080p @ 60 Hz

1080p @ 30 Hz

1080p @ 29.97 Hz

1080p @ 25 Hz

1080p @ 24 Hz

1080p @ 23.98 Hz

1080i @ 59.94 Hz

1080i @ 50 Hz

1080i @ 60 Hz

720p @ 59.94 Hz

720p @ 50 Hz

720p @ 60 Hz

576i (PAL)

480i (NTSC)
Embedded Audio:
This option configures the SDI video output signal. Options are:

Enabled

Disabled (outputs SDI/HDMI video without audio)
Configuration Tab: