---------------------------------------------------------------------------------------------
- 7 -
Rear View
5 Jumper Blocks
These blocks of jumper locations set the configuration for the DVD R/RW drive.
(See page 8, “Jumper Setting” for details.)
6 DIGITAL OUT Connector
This connector is used to connect CD Digital Audio to an audio board.
7 Line Out Connector
This connector is used to connect CD-Audio to an audio board.
8 I/O BUS Connector
This BUS connector is used to control the DVD R/RW drive and sent data.
Use a flat ribbon cable to connect your computer to the DVD R/RW drive.
Connect the colored side of the ribbon cable to the side marked with the arrow.
9 Power Connector
Use this to provide operating power from the host computer.
5
6
7
8
9
