AOpen 3000, User Manual

Page: 221 / 240

207
If you still encounter problems after going through the corrective measures, please
contact your dealer or an authorized service center for assistance. Some problems
may be solved using the BIOS Setup Utility. See “BIOS Utility” on page 195.
Parity Check 2 nnnn* Parity error found in the I/O bus. BIOS attempts to
locate the address and display it on the screen. If it
cannot locate the address, it displays
nnnn .
Press <F1> to resume, <F2>
to Setup, <F3> for previous Displayed after any recoverable error message. Press
<F1> to start the boot process or <F2> to enter Setup
and change the settings. Press <F3> to display the
previous screen (usually an initialization error of an
Option ROM, i.e., an add-on card). Write down and
follow the information shown on the screen.
Run the I2O Configuration
Utility One or more unclaimed block storage devices have the
Configuration Request bit set in the LCT. Run an I2O
Configuration Utility (e.g. the SAC utility).
Error Messages Corrective Action
AW40-multi-language.book Page 207 Tuesday, October 25, 2005 5:33 PM