2
2
Option A
1. Remove the NeckTek frame from the packaging and unfold the arms. It will arive inside
out and upside down. Unfold the arms untintil they stop
2. Hold the arms up and thread the elastomer band through the slot at the end of one arm
and fold it back towards the other. NOTE the product label should be visible.
3. Take the two ends of elastomer & bring them to the other arm. At this point you can
tape them together if it makes threading easier. Fold them over the end bars and up
through the slot between them. Pull taught and the band will hold firm. You can adjust
the resistance and begin using your NeckTek.
For Option A the band can also be se-
cured with the bulldog clip provided. This is easier to adjust for your clinic
.
See how to assemble your NeckTek on YouTube
Option B
Assembling your NeckTek
