AOC L22W631, Service Manual

Page: 9 / 96

22’’ LCD TV AOC L22W631
9
1. Set time: You can set clock with up/down key. After pulling out power cord, clock will be called back to 12:00 AM.
You should set again when you plug power cord.
2. Language: Three languages provided - English, Portuguese and Spanish.
3. Sleep timer: Set the sleeping timer and the alert function, which will indicate the time left. You can set as
5,10,15,30,45,60,90,120,180,240 Min or off
4. CC: Set Close caption function on or off
5. CC Preset: Set Close caption channel. You can select CC1~CC4,TT1~TT4.
6. Reset to default: Reset the function setting to the factory default value.
TV Setup
The following menu appears only in the TV mode.
1. Program no.: Shows the current channel number. You can change program no with left/right key of remote
control.
2. Tuning mode: Select the mode of TV signal
–Cable
3. TV System: There are four options as NTSC-M, Auto, PAL-M and PAL-N. Recommend set it to auto.
4. Auto search: Select "Auto Search" to search all signaled channel; when the search is complete, it stays at the
first channel with signal and all channels that have been located are stored. If you would like to stop "Auto
Search" during the process, press the Menu button.
5. Fine Tuning: Fine Tune frequency of current program.
6. AFC : AFC can be set to ON or OFF. When it is set to ON, the TV will search the TV signal automatically. When
there is any offset in the signal, it will automatically adjust the channel to the correct position.
7. Skip: can be set to ON or OFF. When it is set to ON, the channel without signal can be skipped by pressing the
up/down button on the remote control or on the front panel.
8. Reset to default : Reset the TV setting to the factory default value.