AOC E2775SJ User Manual Download Page 6

Page: 6 / 62

Installation

Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a

person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by

the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and

use mounting accessories recommended by the manufacturer. A product and cart combination should be moved

with care.

Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a fire or

electric shock. Never spill liquids on the monitor.

Do not place the front of the product on the floor.

Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate hence

overheating may cause a fire or damage to the monitor.

See below the recommended ventilation areas around the monitor when the monitor is installed with the stand:

Installed with stand

Leave at lease this space
around the set

10cm

4 inches

10cm

4 inches

11 7/8 inches

10cm

4 inches

30cm

Summary of Contents for E2775SJ






























































Search results

Summary of Contents for E2775SJ

Reviews:

Brands by name

Popular brands

AOC E2775SJ, User Manual

Search results

Summary of Contents for E2775SJ

Reviews:

Brands by name

Popular brands