5
2. Parts and Functions
2.1. Control Panel
9
1
2
3
4
5
6
7
8
MUTE
INPUT
MENU
1
[ ] button
Use this button to turn the display on or put the display to standby.
2
[MUTE] button
Switch the audio mute ON/OFF.
3
[INPUT] button
Choose the input source.
• Used as [
] button in the On-Screen-Display menu.
4
[ ] button
Increase the adjustment while OSD menu is on, or increase the
audio output level while OSD menu is off.
5
[ ] button
Decrease the adjustment while OSD menu is on, or decrease the
audio output level while OSD menu is off.
6
[ ] button
Move the highlight bar up to adjust the selected item while OSD
menu is on.
7
[ ] button
Move the highlight bar down to adjust the selected item while OSD
menu is on.
8
[MENU] button
Return to previous menu while OSD menu is on, or to activate the
OSD menu when OSD menu is off.
9
Remote control sensor and power status indicator
•
Receives command signals from the remote control.
•
Indicates the operating status of the display without OPS:
-
Lights green when the display is turned on
-
Lights red when the display is in standby mode
-
Lights amber when the display enters APM mode
-
When {
SCHEDULE
} is enabled, the light blinks green and
red
-
If the light blinks red, it indicates that a failure has been
detected
-
Lights off when the main power of the display is turned off
* Using IR sensor cable for better remote control performance.
(Please refer to the instructions of 3.5)
