8
SPECIFICATION
Power supply
120V/60Hz,~800W
Max. Locked motor approx. wattage
2000W
Net weight
5.8Kg/12.8Lb
Gross weight
6.25Kg/13.8Lb
Overall dimension(L×D×H)
410mm×210mm×330mm
(16.14 x 8.27 x 12.99 inch)
PROBLEM
SOLUTION
The Grinder Head becomes stuck during
grinding process
1. the quantity of ingredients pushed down the
“Grinder Head” is too much. Ensure you have sliced
the meat into 20mm
×
20mm cubes to allow the them
to easily fit down the Grinder Head.
2. Dislodge any blockages by turning “REV” button for
3-6 seconds. Then switch off the Meat Grinder and try
again.
The meat grinder is too noisy during use
Check that all removable components have been
correctly fitted by following the assembly instructions.
The meat grinder stops during operation Do not use continuously for more than 10 minutes at a
time. Switch the appliance off and unplug after 10
minutes period and allow to cool before continuing.
There are small metal filings within the
extruded meat.
1. Before using, please clean all parts thoroughly
except the motor housing.
2.Do not wash the parts which are not dishwasher safe
in a dishwasher.
3.Any problem, please contact the supplier.
WARNING
Never attempt to remove a blockage using metal implements such as knives or
with your fingers.Turn off the appliance and disconnect from the mains before removing a blockage.
TROUBLESHOOTING